0-10V/1-10 V LED dimmer

   With the rise of LED lightings, The rising application of Led lighting used in hotels,business center,

family, There are more and more chances that led and fluorescent lamp used in  same occasions.To

incorporate LED system with traditional mature fluorescent lamp is very convenient.

but LED lightingtheory and the traditional fluorescent lamp light adjusting principle are not the same

, fluorescent lamp dimming system cannot directly dimming of LED.Fluorescent lamp dimming system

can not directly dimming of LED.

    Our launched 0-10V,1-10v series dimming driver serious perfectly solve the compatible problem of 

fluorescent lamp dimming system and LED lighting , take advantage of many traditional intelligent

dimming system to control LED lamp.Pls following our product introduction:

 http://www.euchipsonline.com/category/?010v110vdimmer.html

You can contact us : fulin@euchips.com

                            qq:1184528255

                 
          skype:linfu299

Trailing edge or leading edge

     The rising cost of energy is certainly driving consumers, retailers, and commercial property owners 

alike to seek out energy-efficient lighting technology.Today we’re examining another element of LED 

dimming: leading edge versus trailing edge dimming.

  
      Trailing edge dimmers (aka “electronic dimmers”):

• The electrical current (sinusoidal signal) is turned off at the end of the AC input waveform immediately before the zero crossing
• Traditionally used for electronic drivers or low voltage transformers (capacitive loads)
• Is not subject to a high inrush of voltage that leads to a high inrush of current
• Does not cause buzzing sound when dimmed

Leading edge dimmers (aka “triac dimmers” or “incandescent dimmers”):

• The electrical current (sinusoidal signal) is turned off at the front of the AC input waveform immediately after the zero crossing
• Traditionally used for incandescent lamps or magnetic low voltage transformers
• Produces a quick inrush of voltage into the load every half cycle which leads to a high inrush current into the electronic components of the LED lamp
• Causes buzzing sound when dimmed (though buzzing is not always perceptible and is dependent on many different factors, such as lamp design and number of lamps on a circuit. Even the dimmer itself, such as whether it allows dimming level adjustments and its minimum load requirements).

Trailing edge dimmers are a better fit for LED lamps. However, because LED retrofit lamps are more likely to be installed on existing dimmers used for incandescent or halogen lamps, many manufacturers design and test their LED lamps to be compatible with leading edge dimmers. Leapfrog Lighting is no exception.

So the short answer as to whether our PAR lamps work with trailing edge or leading edge dimmers is that they work with both. However, we’ve gone through great lengths to test with many different dimmers and only claim compatibility with those tested dimmers, even though they’ve been found to work with quite a few others.

If you are concerned about dimmability of your LED lamp with your existing dimmers, always consult the manufacturer’s product datasheets or contact the manufacturer directly. They should be able to provide you with test reports indicating compatibility.

Let's have a look at our on sale leading edge and trailing edge dimmer

http://www.euchipsonline.com/category/?triacdimmer.html

EUP60S-700A

Item:EUP60S-700A
Input Voltage:120-277VAC
Output Current:700mA*2Channel
Output Voltage:6-43VDC
Output Power:60W
Dim Mode:0-10V/1-10V
G.W.(g):380
Size(mm):203*54*34

 Feature

●Two channels constant current output, each channel output current is 700mA

●Support 0-10V/1-10V analog dimming signal, Passive or active signal.

●Wide range voltage Input 120-277VAC

●High efficiency: up to 86%

●Built-in active PFC function

●Output short circuit protection , over temperature protection.

Pls contact us: fulin@euchips.com

                  qq:1184528255

                phone:15902185665

                skype: linfu299

               website:www.euchipsonline.com

EUP150A-1W24V-1

For more information pls visit our store: www.euchipsonline.com
Item:EUP150A-1W24V-1
Input Voltage:100-240VAC
Output Current:6.25A*1Channel
Output Voltage:24VDC
Output Power:150W
Dim Mode:0-10V
G.W.(g):610
Size(mm):196*75*40

Feature

●Signal channel constant voltage, 24VDC output

●Support passive 1-10V analog dimming signal

●Dimming range from 0-100%, LED start at 1% possible

●Wide range voltage Input 100-240VAC

●High efficiency: up to 90%

●High PF:>0.95(115VAC)

●Dimming effect smooth, no flicker

●Output short circuit protection , over power protection,

over current protection.
Contact us:
fulin@euchips.com
qq:1184528255
skype:linfu299

EUP45T-1WMC-0

Item:EUP45T-1WMC-0
Input:40-240VAC 1A max
Output: Po=45W max
Dim Mode:Triac/ELV
G.W.(g):225
Size(mm):122*78*32

 Features

●Single channel output, Output current level selectable by DIP S.W.

●Support Leading edge (TRIAC) and Trailing edge (ELV) Dimmer

●High efficiency up to 87%

●Wide range of input voltage 40-240VAC

●The dimming curve smooth

●Output short-circuit protection, over current protection

●Suitable for indoor LED lighting application

More information from Our  www.euchipsonline.com

DMX lighting for nightclubs and bars

  Nowadays DMX is part of the disco or night club.Once an individul enters a

disco he would look for a variety of things like ambience,songs,light etc.

  Now with the introduction of DMX lighting,there is a strange mix of all

these aspects.Imagine a disco that plays music and has lights also grooving

to it? Sounds interesting right?Well yes, DMX lighting has made this possible.

Digital Multiplex or DMX lighting is the LED lighting that is managed at the

control panel where the direction of the light and the complete lighting system

is managed by the software.This type of lighting can make the disco be lively

and enjoyable.

  DMX lighting is also well-liked as it comsumes small amounts of energy.Hence

it offers you a chance to cut the electricity bill too.They help in making the

place look amazing and that too without splurging any huge amount of cash.

  These lighting fixtures are thus simple to maintain and long lasting.

With these many advantages it is tough to ignore this special lighting system.

Make the party a lot more enjoyable and interesting using these DMX lighting

systems.


 With these unique and interesting lighting systems that are easy to manage

and control it is easy to entice folks to the show.Make your show or disco

stand tall from the rest.Opt for the DMX lighting and set up them in your

disco today.You can avail them at a cost-effective price too.Check out the

prices on the internet and get them today.

You can visit our online shop: www.euchipsonline.com

KSF114D0FF

Model: KSF114D0FF

9W RGBW 

2.4G Remote controll

DESCRIPTION

KSF114D0D LED Bulb Light series adopt high intensity LED as its luminous body.

Housing of die cast aluminum offers highly efficient heat dissipation.
●30,000 hours average lifetime less maintenance.
●No mercury.
●RGB and warm white
KSF114D0F Series LED Bulb Light can be widely used in hotels, bars, offices and home.
SPECIFICATIONS
COLOR TEMP. (RGB/warm white) :RGB And 3000k
LUMINOUS FLUX(warm white,3000K) : 800 Lm Max
SOURCE  : 20 super bright 2835 SMD LEDs And 4 RGB5050 SMD LEDs
BEAM ANGLE  : 230°
DIMENSION  : Ф60*122mm
Remote Model  : RC19
ELECTRCAL SPECIFICATIONS
INPUT VOLTAGE  : 100-240VAC
POWER CONSUMPTION  :  7.0W
ENVIRONMENTAL SPECIFICATIONS
TEMPERATURE RANGE  :  0-35℃

PROTECTION RATING  : IP40

PACKING

Package One  :
KSF114D0F 1 led bulb light
Package Two  :
KSF114D0FF 1 Remote + 4 led bulb lights

Contact us :sales@euchipsonline.com

For more information: www.euchipsonline.com